高压输电线路跨越建筑物工频电场研究

当高压输电线路跨越或邻近建筑物时,线路下方区域工频电场会发生不同程度的畸变,此时,传统的二维模型已无法正确描述该情况时线路下方工频电场的分布。利用自编仿真软件进行模拟,并结合实测数据,研究和分析高压输电线路跨越或邻近建筑物时线路下方的工频电场分布和变化趋势。     

Management of the Panzootic White‐Nose Syndrome through Culling of Bats

Abstract: The probability of persistence of many species of hibernating bats in the United States is greatly reduced by an emerging infectious disease, white‐nose syndrome (WNS). In the United States WNS is rapidly spreading and is associated with a psychrophilic fungus, Geomyces destructans. WNS has caused massive mortality of bats that hibernate. Efforts to control the disease have been ineffective. The culling of bats in hibernacula has been proposed as a way to break the transmission cycle or slow the spread of WNS. We formulated a disease model to examine the efficacy of culling to abate WNS in bat populations. We based the model dynamics on disease transmission in maternity roosts, swarms, and hibernacula, which are the arenas of contact among bats. Our simulations indicated culling will not control WNS in bats primarily because contact rates are high among colonial bats, contact occurs in multiple arenas, and periodic movement between arenas occurs. In general, culling is ineffective in the control of animal diseases in the wild.     

降低超高压输电线路电晕噪声的对策研究

从电力金具的选型、设计、生产、运输、安装和优化改造等环节提出了降低超高压输电线路电晕噪声的对策措施。同时，通过对超高压输电线路铁塔可听噪声和金具电晕放电情况的检测，验证优化改造金具的降噪效果，查找金具安装的缺陷和漏洞，为金具制造和设计、预防电晕措施的选择及电力金具的改良、安装和运行等方面提供决策和参考依据。     

乌鲁木齐冬季雾天可吸入颗粒物透射电子显微镜研究

利用透射电子显微镜(TEM)对乌鲁木齐冬季雾天采集的可吸入颗粒物(PM_2.5、PM_2.5~10)的形貌特征和集聚状态进行分析。将乌鲁木齐大气可吸入颗粒物分为烟尘集合体、飞灰、矿物颗粒、硫酸盐和有机颗粒等5种单颗粒类型,并讨论了其来源。TEM分析表明,PM_2.5中烟尘集合体占14%,飞灰占7.4%,矿物颗粒占24%,硫酸盐占16.7%,有机颗粒占20.4%;PM_2.5~10 中烟尘集合体没有观察到,飞灰占4.9%,矿物颗粒占26.8%,硫酸盐占12.2%,有机颗粒占58.5%。     

中美职业安全健康法对比

通过对中美职业安全健康立法目的和背景的考察,对比分析职业安全健康法涉及的6项具体内容,即体例结构、适用范围、监管方式、监管体制、教育与培训、法律责任,并指出国情不同是造成中美职业安全健康法立法巨大差异的原因之一。经对比分析,可得出几点结论:从中国国情出发,走逐步完善的职业安全健康立法路径,建立独立的职业安全健康法律体系,是我国安全生产的治本之策;对从业人员的职业安全健康保护具有首要性,须明晰保护劳动者的上层法律要求,《安全生产法》并不能代替《职业安全健康法》;完善中国职业安全健康法律制度须走一体化整合的道路。     

Multi-objective-based optimal transmission switching and demand response for managing congestion in hybrid power systems

ABSTRACT

This paper proposes a novel congestion management (CM) approach by using the optimal transmission switching (OTS) and demand response (DR) for a system with conventional thermal generators and renewable energy sources (RESs). In this paper, wind and solar PV units are considered as the RESs. The stochastic behavior of wind and solar PV powers are modeled by using the appropriate probability density functions (PDFs). The proposed CM methodology simultaneously optimizes the generation dispatch, demand response, and also the network topology of the power system. The OTS identifies the branches that should be taken out of service by significantly reducing the operating cost of the system while respecting the system security. Here, the total operating cost minimization/social welfare maximization and system losses minimization are considered as the objectives to be optimized. The proposed CM problem is solved using the multi-objective Jaya algorithm and it is used to determine a set of Pareto-optimal solutions. The Jaya algorithm is simple and it does not have any algorithmic-specific parameters to be tuned. This aspect reduces the designer’s effort in tuning the parameters to arrive at the optimum objective function value. A fuzzy logic-based approach is used to identify the best compromise solution. The effectiveness of the proposed CM approach is examined on modified IEEE 30 and practical Indian 75 bus test systems. The obtained simulation results are analyzed and they show the effectiveness of the proposed approach.     

云南省工业化进程判断及路径选择

云南省是一个人口众多、生产力水平低下的边疆、民族、山区省份，其工业发展严重滞后于全国平均水平。要使云南省实现经济增长方式的转变，缩小同发达地区的差距，实现跨越式的发展，坚持走工业化的道路是必然选择。分析了目前云南省工业发展中存在的问题，对其工业化的发展阶段做出判断，并针对今后云南省工业化的路径选择问题进行了分析。     

输变电项目环评存在问题分析及对策建议

列举了国家环保总局环境工程评估中心在输变电项目环境影响技术评估中遇到的一些技术和管理上亟待解决的问题,在对其分析的基础上,提出相应的对策建议.     

不同塔型交流输电线路的电磁环境分析

选择500 kV同杆双回紧凑型线路、500 kV同杆双回常规线路、500 kV单回紧凑型线路、500 kV单回常规线路、220 kV同杆双回线路和220 kV/110 kV同杆4回线路进行不同塔型交流线路的电磁环境测量.通过测试和计算分析,给出了被测试线路的电磁环境水平.